Page 1 of 1

OAV ACARS shows no A/C --- Sending a Pirep not possible

Posted: Wed Feb 25, 2015 1:26 pm
by OAL408 Danny Schoess
Hello,

i tried several times, to fly a flight, which i have booked. But OAV don´t shows information about my A/C i fly and it don´t detects, when i start or end a flight.
Due to this problem, i can´t send any pirep for completed flights.

May someone help me, solving this problem?

Re: OAV ACARS shows no A/C --- Sending a Pirep not possible

Posted: Wed Feb 25, 2015 4:23 pm
by OAL853 Nick Papandreou
Hello Danny,

Have you followed the Quick Installation guide?
Are you experiencing any errors when running ACARS?
A little more info plus pictures would help!

Re: OAV ACARS shows no A/C --- Sending a Pirep not possible

Posted: Tue Mar 03, 2015 12:06 pm
by OAL408 Danny Schoess
Yes i followed the Quick Installation Guide.

When i start ACARS, there comes no error.
When i load a booked flight and tick it, there comes an error. Attached, you will find some Screenshots:

https://www.dropbox.com/s/t8ny1xnk2erz0 ... 8.png?dl=0
https://www.dropbox.com/s/ye06zzysnkigr ... 3.png?dl=0
https://www.dropbox.com/s/g6kcg81x2a4vy ... 8.png?dl=0
https://www.dropbox.com/s/ixkk54fl5cnqx ... 0.png?dl=0

Re: OAV ACARS shows no A/C --- Sending a Pirep not possible

Posted: Tue Mar 03, 2015 9:42 pm
by OAL853 Nick Papandreou
Danny, could you please do step 9 of the Quick Installation Guide and check if you are still getting an error during the flightplan parsing?
There's no need to open fsx to test it, just book a flight, run acars and retrieve the flightplan.